Min.Order : 1 Pieces Quick Quotation >
Item Details
Product Description
DS-2CD2410F-IW
1MP IR Cube Network Camera
1. HD720p Video
2. Built-in Wi-Fi optional
4. 3D DNR & DWDR & BLC
5. Good Choice for home use
6. PIR sensor,support motion detection
7. POE
8. IR range up to 10m
Camera | |
Image Sensor: | 1/4" progressive scan CMOS |
Signal System: | PAL/NTSC |
Min. Illumination: | 0.01Lux @(F1.2,AGC ON) ,0 Lux with IR |
0.028Lux @ (F2.0, AGC ON) ,0 Lux with IR | |
Shutter time: | 1/3 s to 1/100,000 s |
Lens: | 4mm@ F2.0, Angle of view: 55° |
(2.8mm, 6mm optional) | |
Lens Mount: | M12 |
Day& Night: | IR cut filter with auto switch |
Wide Dynamic Range: | Digital WDR |
Digital noise reduction: | 3D DNR |
Compression Standard | |
Video Compression: | H.264/MJPEG |
H.264 code profile: | Main Profile |
Video bit rate: | 32Kbps~8Mbps |
Audio Compression: | -S: G.711/G.722.1/G.726/MP2L2 |
Audio bit rate: | 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2) |
Image | |
Max. Image Resolution: | 1280 × 720 |
Frame Rate: | 50 Hz: 25 fps (1280 x 720), 25 fps (704 x 576), 25 fps (640 x 480) |
60 Hz: 30 fps (1280 x 720), 30 fps (704 x 576), 30 fps (640 x 480) | |
Image Settings: | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
BLC: | Yes, zone configurable |
ROI: | support |
|
|
3D DNR: | support |
Network | |
Network Storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128G, NAS(NFS, SMB/CIFS) |
Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
|
|
Protocols: | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP, |
NTP,UPnP,SMTP,IGMP,802.1X,QoS,IPv6,Bonjour | |
General Function: | One-key recovery, Anti-Flicker, three streams, heartbeat, mirror, password protection, video |
mask, Watermark, IP address filtering | |
System Compatibility: | ONVIF, PSIA, CGI, ISAPI |
Interface | |
Communication Interface: | 1 RJ45 10M / 100M Ethernet interface |
Alarm Input: | 1 |
Alarm Output: | 1 |
Wi-Fi Specification (-W) | |
Wireless Standards: | IEEE802.11b, 802.11g, 802.11n |
Frequency Range: | 2.4 GHz ~ 2.4835 GHz |
Channel Bandwidth: | 20/40MHz Support |
Modulation Mode: | 802.11b: CCK, QPSK, BPSK |
802.11g/n: OFDM | |
Security: | 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK, WPS |
Transmit Power: | 11b: 17±1.5dBm @ 11Mbps |
11g: 14±1.5dBm @ 54Mbps | |
11n: 12.5±1.5dBm | |
Receive Sensitivity: | 11b: -90dBm @ 11Mbps (Typical) |
11g: -75dBm @ 54Mpbs (Typical) | |
11n: -74dBm (Typical) | |
Transmission Rate: | 11b: 11Mbps |
11g: 54Mbps | |
11n: up to 150Mbps | |
Wireless Range: | 50m(depend on environment) |
Protocols: | 802.11b: CCK, QPSK, BPSK |
802.11g/n: OFDM | |
General | |
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F) |
Humidity 95% or less (non-condensing) | |
Power Supply: | 12 V DC ± 10%, PoE (802.3at) |
Power Consumption: | 5.5W MAX |
IR Range: | 10 meters |
PIR: | Angle: 80° |
Range: 10m | |
Dimensions: | 72.3×89.9×131.3mm (2.85”×3.54” ×5.17”) |
Weight: | 400g(0.88lbs) |
How to set the WIFI camera
1) Wireless Router Configuration ‘SSID No’: Letter or number filled by user;
‘Channel’: ‘6’ frequency band is normally used, which can be selected according to current environment; Choose’54Mbps (802.11g)’ in ‘Mode’. Enable ‘Enable Wireless’ and ‘Enable SSID broadcast’ column; Use ‘Security Configuration’ according to current environment; when it is enabled, ‘security type’, ‘security option’, ‘secret key type’ and ‘secret key content’ should be configured.
2) Login IPC using IE browser to set the wireless parameter. Take 10.9.6.212 as an example.
a) Fill in “http:// IP of IPC” in address bar, such as “http://10.9.6.212”.
b) Configuration-advanced configuration-network-TCP/IP, set IPv4 address, gateway address and mask address same as the router in your network and save the configuration
c) Switch from LAN to WLAN, disable DHCP, set the IPv4 configuration of WLAN same as LAN,and save the configuration
? Quality Control
1. All raw materials are carefully selected and inspected.
2. Advanced production equipment is used and routinely inspected and serviced.
3. All operators and employees are thoroughly trained.
4. All products have passed the European Union RoHS standard and are CE, FCC certified.
5. All products must pass strict inspection before delivery.
6. Professional logistics personnel are employed to control the damage during the physical distribution of products.
? Cost Control
1. Our factories have been accredited in terms of ISO9001, and our advanced management system increases efficiency and reduces costs.
2. Bulk purchasing has reduced our material cost, and massive production have lowed each product cost.
3. Advanced production equipment such as our SMT production line provides a highly efficient production rate.
4. Reduction of any unnecessary surplus of products by strict stock control reduces our warehousing costs.
? Strong Tech Support
1. Presale: product consultation and solution design can be provided.
2. Sale: spares parts can be provided at a certain discount. Delivery time is approximately two weeks. Please note that delivery times may vary depending on the destination and transportation method.
3. After sale: We offer a 2-years warranty, which includes maintenance and technical support for all the products. Within the warranty period, exchanges and free maintenance are provided. If any quality issues occur, please contact us for technical support via telephone, email, or any method available on our site.
4. We can also provide project designs, customized products, online training, in-person training, and OEM services.
Payment & Shipping
More Product
Recommend Product
